While somewhat intimidating at first, it turns out reflow is actually really easy compared to hand soldering each part. First you apply solder paste to the pcb, I used a stencil for this that I got from www.oshstencils.com . I held down the stencil with some tape and spread out the paste. I ended up with a […]
BTLE 4.0 to 900Mhz Project Overview
This is my Bluetooth 4.0 to 900Mhz mesh network bridge. Here is a quick summary of what it will do. I plan to use this design as a development platform. There is plenty of room for code, and potential applications are starting to pile up. Possible applications so far are home automation, weather stations, boat monitor […]
Revision 1: PCBs, Parts, and Stencil Ordered
Going into this project I knew two things. I wanted a radio, and I wanted the PCB to be full of parts. I decided to make something with a BTLE (Bluetooth 4.0) radio so I could control it with my phone. After looking at a few BTLE chips, I decided on the Nordic Semiconductor’s nrf51822. […]